How To Use; Setting And Using The Water Heater - Electrolux EN19WI30LS User And Care Manual

How to Use

Setting and Using the Water Heater

DANGER
Hot Water Heater temperatures over 125°F (52°C) can cause
severe burns instantly or death from scalding.
•
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, ask professional person.
• When setting the unit to 125°F / 55°C (131°F) or higher, the
temperature display will flash for 10 seconds and emit a tone
as a high temperature warning.
• Take caution when using the unit again after setting to 125°F
(52°C) or higher. Always check the set temperature before use.
• Do not allow anyone to change the water temperature while
hot water is running.
12
2
1
To prevent scalding:
High Temperature
(Starting with the Power Off)
1
Press the Power
On/Off Button.
The temperature will be
displayed on the remote
control thermostat.
On
Previous set
temperature
(Ex.: 110°F)
Remote controller Display
Flashes for 10 sec
On