Electrolux EN19WI30LS User And Care Manual page 17

An alarm will sound for
ten seconds when the flow
reaches the set level.
The water will continue to run unless
it is manually turned off.
To set the flow meter alarm:
3
Adjust flow meter
alarm setting.
Press the flow meter alarm set button
(the setting will flash on the display)
and adjust with the setting buttons.
Choose the flow meter alarm setting from the following
options: 10 - 60 gallon (40 - 240L) (In 5 gallon (20L)
intervals), 70 gallon (260L), 80 gallon (300L),
90 gallon (340L), 100 gallon (380L) , 990 gallon.
The alarm will not sound if it is
Note:
set for 990 gallon.
Flow meter setting will be flashing
(ex. 45 gallon)
Flow meter setting will be flashing (ex. 180L)
* The level can only be adjusted
while the indicator is flashing.
* After ten seconds, the remote will
again display the temperature.
Water Temperature
4
Turn on hot
water.
Increase
Decrease
On
On
(
°F :
The temperatures settings below are only examples. The
temperature setting necessary will depend on the usage,
the length of piping and the time of year.
100 105
Warm Warmer
(
°C (°F) :
The temperatures settings below are only examples. The
temperature setting necessary will depend on the usage,
the length of piping and the time of year.
37 38 39 40 41 42 43 44 45 46 47 48
(99) (100) (102) (104) (106) (108) (109) (111) (113) (115) (117) (118)
Warm Warmer
* Initial factory setting: 110°F or 40°C (104°F)
5
The alarm will sound when
the set level has been
reached. Stop the water.
Note:
)
110 115 120
Hot
)
Hot
Turn off the hot
water when the
alarm sounds.
The alarm will not sound
if it is set for 990 gallon.
Off
Off
15