Flow Meter Alarm - Electrolux EN19WI30LS User And Care Manual

How to Use

Flow Meter Alarm

Preparation
Plug the bath drain.
14
2,3
1
3
(Starting with the power off)
1
Press the Power
On/Off Button
The temperature will be displayed
on the remote control thermostat.
On
Previous set temperature (example:110°F)
On
Previous set temperature (example:40°C)
If the flow meter alarm is being used to
indicate when a tub is full:
• If any hot water is being used besides
what is going into the tub, the alarm
will sound before the tub is full.
• If there was water in the tub before
the fill began, or if the water is not
shut off manually when the alarm
sounds, the tub may overflow.
• If there was water in the tub before
the fill began, the temperature in the
tub after it is full may be different from
the temperature setting.
2
Set temperature.
(
Always check
temperature setting
before use.
On
Check the indicator lights.
Check the indicator lights.
)
Hot
Cold
Water temperature
Water temperature