Specifications - Electrolux EN19WI30LS User And Care Manual

Specifications-1

Item
Model Name
Type
Ignition
Operating Pressure
Minimum Flow Rate
Dimensions (Height) x (Width) x (Depth)
Weight
Water Holding Capacity
Connection Sizes
Power Supply
Materials
Safety Devices
Accessories
Item
Gas
Consumption
Maximum Hot Water Capacity
Capacity Range
Temperature Settings
Default Temperature Options
• Specifications may be changed without prior notice.
• The capacity may differ slightly, depending on the water pressure,
Specifications
Installation
Air Supply/Exhaust
Water Inlet
Hot Water Outlet
Gas Inlet
Condensate Drain
Supply
Consumption
Casing
Flue Collar
Primary Heat Exchanger
Secondary Heat Exchanger
Performance
NG
LP
45°F (25°C) Rise
°F Mode:
°C Mode:
water supply, piping conditions, and water temperature.
EN18WI30LS
Indoor Wall Mounted
0.5 GPM (2 L/min.)
24.4" (619mm) x 18.4" (468mm) x 9.4" (240mm)
0.5 Gallon (1.8L)
73W
Freeze Prevention 213W
Stainless Steel / Zincified Steel Plate
Copper Sheeting, Copper Tubing
Stainless Steel Sheeting, Stainless Steel Tubing
Flame Rod, Thermal Fuse, Lightning Protection
Device (ZNR), Overheat Prevention Device, Freezing
Prevention Device, Fan Rotation Detector
Remote Controller, Remote Controller Cord,
Anchoring Screws
Maximum Performance
180,000 btuh
180,000 btuh
7.5 GPM (28.2 L/min.)
0.5-9.8 GPM (2-37.0 L/min.)
100-140°F (In 5°F intervals) (9 Options)
37-48°C (In 1°C intervals),
50,55,60°C (In 5°C intervals) (15 Options)
120°F (50°C), 130°F (55°C), 140°F (60°C)
(Original is 120°F (50°C))
Specification
EP18WI30LS
Power Vented
Direct Ignition
15-150 psi
58 lbs.
3/4"
3/4"
3/4"
1/2" Threaded
120 VAC (60Hz)
78W
PVC
Minimum Performance
16,000 btuh
16,000 btuh
31