Electrolux EN19WI30LS User And Care Manual page 15

2
Set temperature.
(
Always check the
temperature setting
before use.
Hot
Cold
Check the indicator lights.
Water temperature
When using °F mode:
(
°F :
The temperature settings below are examples. The temperature setting
necessary depends on the usage, the length of piping and the time of year.
100 105
Washing
dishes, etc.
When using °C mode:
(
°C (°F) :
The temperature settings below are examples. The temperature setting
necessary depends on the usage, the length of piping and the time of year.
37 38 39
(99) (100) (102) (104) (106) (108) (109) (111) (113) (115) (117) (118) (122) (131) (140)
Washing
dishes, etc.
If fixtures incorporate mixing valves, set the temperature higher than usual.
* For most residential applications, the recommended setting temperature is 120°F / 50°C (122°F)
or less.
* Consult local codes for minimum operating temperatures.
3
Turn on hot
)
water.
110 115
Shower, hot water supply, etc.
40 41 42 43
Shower, hot water supply, etc.
On
)
The maximum output temperature can be
set using the remote controller. (
120 125 130
High temperature
*Initial factory setting is 110°F
The maximum output temperature
) can be set using the remote
controller. (
44 45 46 47
*Initial factory setting is 40°C (104°F)
4
Turn off the hot
water.
Off
p.17)
135 140
p.17)
48 50 55 60
High
temperature
13