Brother PDS-5000 User Manual page 88

Scan (Macintosh)
Edge Fill
Select White or Black and set a value (in millimeters) to add a white or black edge around the border of your
scanned image.
NOTE
• The maximum edge fill the value of the shorter side of a selected paper size. For example, if you select a
Letter size, which is 8.5 × 11 in., the maximum value for the white edge or black edge is 4.25 in. (or half of
8.5 in.). If you have selected an A4 size, which is 210 × 297 mm, the maximum value for the white edge
or black edge is 105 mm (half of 210 mm).
• If you set a value greater than the maximum allowed, the value automatically defaults to the maximum.
• To disable this feature, set the each value to 0.
Despeckle
This function allows you to remove small dots or specks called "noise," from the background of scanned
images. Removing unwanted speckles provides a clear image for OCR processing, and helps to reduce
compressed file size.
Define the noise you want to remove by specifying Noise Number (size) and Noise Radius (range).
Before Despeckle
(Noise Number: 0, Noise Radius: 1)
NOTE
Despeckle is available for black and white images only.
Original Edge Fill: 20 mm (Black)
After Despeckle
(Noise Number: 22, Noise Radius: 10)
6
83