Wash/Rinse/Spin Individually - Panasonic ECONAVI NA-FS95G3WAU Operating Instructions Manual

Wash/Rinse/Spin Individually

You can select the desired cycle combination, such as "wash and rinse" or "spin only". (These are not
saved.)
Before you begin
●
Load clothes in the tub, close the lid, and turn on the water taps and the washing machine.
1
When the "Cotton" cycle is selected:
Press ,
●
Select the water temperature (P.5)
●
Set the finish time (P.11)
2 Press .
●
Change the water level (P.4)
●
About Detergent (P.20)
●
The selected cycles are complete when the washing machine beeps.
Setting the advanced options
Settings
●
Wash only
●
Wash and rinse
●
Wash and spin
●
Rinse only
●
Rinse and spin
●
Spin only
●
Note
●
If you start from the "Rinse" or "Spin" cycle when the tub is filled with water, draining will take place first.
If the tub is empty, the "Spin" cycle will be performed first.
●
If you have used laundry starch, rinse off the starch after the cycle is complete. (Run the "Cotton" cycle
with the water level set to "Middle" or higher. Do not load any clothes.)
18
or repeatedly to select the combination of cycles.
Used for
Using washing liquid twice
Reusing the rinsing water
Washing clothes with
laundry starch
Rinsing washed clothes
Rinsing and spinning
washed clothes
Spinning washed clothes
Draining water in the tub
Buttons used
●
The washing liquid stays in
the tub.
●
The rinsing water stays in the
tub.
●
The rinsing water stays in the
tub.
Remarks