Key Ring; Overflow For Key Ring Calls - NEC DS1000 Product Description

Feature Operation
To place an Intercom call:
1.
To answer an Intercom call (if you hear two beeps and your phone has Handsfree Answerback):
1.
To answer an Intercom call (if you hear one beep and your phone does not have Handsfree
Answerback):
1.
To answer an Intercom call (if you hear ringing):
1.
User Programmable Feature (U Slot): # V A
User Programmable Feature (Fixed Slot): # I V or # I R

Key Ring

other types of trunk calls divert to Key Ring if unanswered. The following conditions also initiate
Key Ring:
Overflow for Key Ring Calls
If unanswered, Key Ring calls can route to a programmed overflow destination. The overflow desti-
nation can be an extension, Ring Group, UCD Group or Voice Mail. You can set up separate Key
ring overflow destinations for the day mode and at night. If unanswered at the overflow destination,
the call again diverts to Key Ring. Note that a Key Ring trunk goes into the night mode when any
extension with night mode capability presses their Night key. See Night Service / Night Ring on
page 64 for more.
DS1000/2000 Product Description
Lift handset and press ICM + Dial extension number.
To call the operator, dial the operator s extension number or dial 0 or 01-04 (depend-
ing on how your system is set up).
If your call voice-announces the destination, you can dial 1 to force the call to ring.
Speak toward phone, or lift the handset for privacy.
Lift the handset.
Lift the handset.
Enables Intercom voice announcements or Forced Intercom Ringing.
So they are not forgotten,
unanswered calls
automatically ring co-
worker's extensions.
Direct Inward Line
An unanswered DIL diverts to Key Ring if unanswered at the extension to which it is termi-
nated (see Direct Inward Line on page 40 for more).
Hold
Calls left on Hold too long recall the extensions that initially placed them on Hold. If still
unanswered, they divert to Key Ring.
Park
Calls parked in orbit recall the extension that initially parked them. If unanswered, the call
diverts to Key Ring.
Transfer
An unanswered Transfer recalls the extension that initially transferred it. If still unanswered,
the trunk diverts to Key Ring.
Section 3: Features
Availability: All versions.
A Key Ring trunk rings an extension according to the settings in
Program 1805 - Ring Assignments. Multiple extensions can be
enabled to ring immediately or after a programmed delay for
each incoming trunk call. In addition, under certain conditions
Section 3: Features
3
57