Off-Hook Signaling; Off-Hook Signaling For Trunk Calls; Off-Hook Signaling For Intercom Calls - NEC DS1000 Product Description

To answer a call ringing the system at night (UNA Pickup):
1.

Off-Hook Signaling

another caller is trying to get through. Off-Hook Signaling helps important callers get through,
without waiting in line for the called extension to become free. After the user hears the off-hook
signal, they can use other system features (such as Hold or Park) to process their active call and
then answer the waiting call.

Off-Hook Signaling for Trunk Calls

While a keyset user is on a handset call, Off-Hook Signaling for trunk calls can be:
Off-Hook Signaling for trunks occurs for DILs, transferred calls, Voice Mail Automated Atten-
dant transfers and Key Ring calls. While Off-Hook Signaling ringing is occurring, use VOL
and VOL
off-hook ringing.

Off-Hook Signaling for Intercom Calls

While an extension user is on a handset call, they can receive Camp-On tones in the telephone
handset from a co-worker that called them and dialed 2 to Camp-On. Turn to Call Waiting / Camp-
On on page 31 for more on how to set this up. Off-hook ringing for Intercom calls is not available.
User Programmable Feature: # O H S
DS1000/2000 Product Description
Press ICM + Dial ** followed by the UNA code (01-04).
Off-Hook Signaling helps
important callers get
through.
While on a handset call, a flashing green Ring/Message lamp, line/loop key, and muted off-
hook ringing in the telephone speaker.
OR
While on a handset or Handsfree call, a flashing green line/loop key and Camp-On tones.
This is the default setting.
to adjust the volume of ringing. Note that single line telephone users cannot receive
Sets up the Off Hook Signaling options for an extension.
Section 3: Features
Availability: All versions.
• DS2000 U Slot (02.nn.nn) and DS1000 add User Program-
mable Feature Steps.
When a user is busy on a call, Off-Hook Signaling indicates that
Section 3: Features
3
65