Ds2000 Default Hardware Setup; Fixed Slot Software; Universal Slot Software - NEC DS1000 Product Description

DS2000 Default Hardware Setup

Every DS2000 system has a factory-installed default setup. The default setup determines the hard-
ware you can install and how the system features work without reprogramming.
Hardware Configuration for DS2000 4 Slot Cabinet with Fixed Slot Software
Following is the default PCB configuration for a 4 slot cabinet using CPU P/N 80025 equipped with
Fixed Slot software. Although Fixed Slot software is no longer available, you may encounter it in
existing installations. Note that an existing CPU P/N 80025 equipped with Fixed Slot software can
be upgraded to Universal Slot software. Contact your Sales Representative for the specifics.
Hardware Configuration for DS2000 4 Slot Cabinet with Universal Slot Software
Both CPU P/N 80025 and P/N 80025A can be equipped with Universal Slot Software. When
installed in a 4 Slot cabinet, each version CPU will provide a different default PCB configuration.
Configuration 1 - with CPU P/N 80025
Following is the default PCB configuration for a 4 slot cabinet using CPU P/N 80025 equipped
with Universal Slot software.
Configuration 2 - with CPU P/N 80025A
Following is the default PCB configuration for a 4 slot cabinet using CPU P/N 80025A
equipped with Universal Slot software. Since a 4 slot system allows only 2 16DSTU PCBs,
you must reprogram this configuration.
DS1000/2000 Product Description
Slot PCB
1 16DSTU
2 16DSTU
3 8 ATRU
4 8 ATRU
Slot PCB
1 16DSTU
2 16DSTU
3 8 ATRU
4 8 ATRU
Slot PCB
1 16DSTU
2 16DSTU
3 16DSTU
4 16DSTU
Section 2: Components
Extensions
300-315
316-331
401-408
409-416
Extensions
300-315
316-331
401-408
409-416
Extensions
300-315
316-331
332-347
348-363
Section 2: Components
2
21