Table of Contents
Advertisement
Menu Screen and Main Menu
SANYO: Appears when no video input
signal source is connected. In addition, it
appears when the DISPLAY setting for
the camera title is set to "OFF".
•
[SINGLE VIEW] button (p. 30)
Click this button to operate the devices that
are connected to the video server (such as
dome cameras, time lapse VCRs,
multiplexers or digital video recorders) singly
or as a group.
•
[VIEW FRAME] button (p. 31)
When this button is clicked, the menu screen
setting items disappear and the images are
displayed in the image area at a fixed size
(720 x 480: RESOLUTION).
•
SINGLE VIEW:
•
MULTI VIEW:
•
[NETWORK] button (p. 17)
This button is used to display and change
network settings.
•
[WIRELESS LAN] button (p. 19)
This button is used to display and change
wireless LAN settings.
•
[PPP] button (p. 21)
This button is used to display and change
the settings used when the video server is
connected to the Internet via a modem.
Note:
This is only possible when the Network
Archive software (sold separately) is used.
•
[CAMERA TITLE] button (p. 32)
This button lets you set camera titles and live
images so that they are not displayed.
•
[ALARM] button (p. 35)
This button is used to display and change
alarm recording settings and other settings
such as motion sensor settings.
•
[CLOCK] button (p. 42)
This button is used to display and change
the video server date and time setting and
the summer time setting.
720 x 480
320 x 240 (4-screen display)
•
[RS-232C] button (p. 43)
This button is used to display and change
the communication speed when the video
server is connected directly to a computer.
•
[SSP] button (p. 44)
Use this button to carry out SSP control.
•
[LANGUAGE] button (p. 47)
Click this button if you would like to change
the language. The language selection screen
will be displayed.
•
[STATUS] button (p. 47)
This button is used to display the firmware
version and video server status information.
3
Network disconnect button
Click this button to disconnect the video server
from the network. The video server will be
disconnected from the network, and "SANYO
NETWORK VIDEO SERVER, THE UNIT IS
DISCONNECTED!" will be displayed.
Menu screen
The menu screen changes when you click on
one of the menu select buttons in the main
menu.
The initial menu screen that is displayed is the
4-screen live image screen.The administrator
can use this screen to change the settings for
transmitting live images from the video server.
– 24 –
English
Advertisement
Table of Contents
