Alarm Settings
5
ALARM BUFFERING setting
•
BUFFERING AREA setting
This sets the ratio between the amount of
space for the memory areas used for
recording pre-alarm and post-alarm
images.
•
(PRE/POST) 0/10
•
(PRE/POST) 1/9
•
(PRE/POST) 2/8
•
(PRE/POST) 3/7
•
(PRE/POST) 4/6
•
(PRE/POST) 5/5
•
PRIORITY setting
This sets the image quality for alarm
recording.
•
PICTURE QUALITY
Alarm images are recorded at high
quality.
•
TIME
Alarm images are recorded at normal
quality.
* The available time for alarm data
recording will become shorter.
6
ALARM RESOLUTION setting
This sets the resolution that is to be used for
recording alarm images.
The default setting is "720x240".
7
OVERWRITE setting
If this is set to "ON" while a memory card is
inserted, old alarm data is erased and new data
is recorded over the top.
(Connecting an alarm sensor)
1
Connect an infrared sensor or similar to
the ALARM IN terminal at the rear of the
video server.
2
Connect a buzzer or lamp to the ALARM
OUT terminal.
GND
12VDC
– 34 –
ALARM
ALARM
1 2
3
4 COM
IN
OUT
IN
OUT
IN
VIDEO 1
ID3
English