Table of Contents
Advertisement
Alarm Settings
7
Set the following alarm recording settings
as required.
When an alarm signal is input, the alarm
data is stored in the video server's memory.
•
ALARM BUFFERING "ON"
•
BUFFERING AREA
•
PRIORITY
•
ALARM RESOLUTION
•
OVERWRITE
MOTION DETECTOR SET Settings
3
7
8
5
1
Click the [ALARM] button in the main
menu.
The ALARM CONDITIONS SET screen will
be displayed.
2
As an example, click the [CH1] button in
the ALARM SET screen.
The ALARM SET –CH_1– screen will be
displayed.
3
Set MOTION DETECTOR to "ON".
The MOTION DETECTOR SET screen will
be displayed.
8
Once you have finished changing the
settings, click the [SET] button.
If an outside intruder activates the infrared
sensor, the ALARM indicator illuminates red
on the live image screen. If a buzzer or lamp
is connected to the ALARM OUT terminal,
the buzzer will sound or the lamp will
illuminate.
4
While looking at the screen, move the
pointer to the motion sensor detection
area and click with the left mouse button.
A sensor mark (ú) will appear in the
detection area (grid).
Set other sensor marks in the detection area
in the same way.
Note: If you click on a sensor mark that has
been set, it will be cleared.
5
Click the [SET] button.
– 36 –
ID3
4
English
Advertisement
Table of Contents
