Asus Pedestal/5U Rackmount Server TS500-E5 User Manual page 110

The ARRAY SELECTION MENU displays the available drives connected to
3.
the SATA ports. Select the drives you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from READY
to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Logical Drives,F4-HSP
The information of the selected hard disk drive displays at the bottom of the
screen.
4. Select all the drives required for the RAID set, then press <Enter>.
The configurable array appears on screen.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Logical Drives,F4-HSP
6-6
Easy Configuration - ARRAY SELECTION MENU
0 READY
1 READY
Port # 0 DISK 77247MB
Easy Configuration - ARRAY SELECTION MENU
0
ONLIN A00-00
1
ONLIN A00-01
Port # 1 DISK 77247MB
PORT #
HDS728080PLA380 PF20A60A
PORT #
HDS728080PLA380 PF20A60A
Chapter 6: RAID configuration