Table of Contents
Advertisement
Press <F10> again, the logical drive information appears including a Logical
Drive menu that allows you to change the logical drive parameters.
Select RAID from the Logical Drive menu, then press <Enter>.
6.
Select RAID 10 from the menu, then press <Enter>.
7.
You need at least four identical hard disk drives when creating a RAID 10 set.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
LD
0
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Select DWC from the Logical Drive menu, then press <Enter>.
8.
Select On to enable the Disk Write Cache setting, then press <Enter>.
9.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
LD
0
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
ASUS TS500-E5
Logical Drive(s) Configured
RAID
Size
#Stripes
Easy Configuration - ARRAY SELECTION MENU
0
308988MB
PORT #
0
DNLIN A00-00
1
DNLIN A00-01
Logical Drive 0
RAID = 0
RAID = 0
Size = 308988MB
RAID 5
DWC = Off
RAID 10
RA
= On
Accept
SPAN = NO
Choose RAID Level For This VD
Logical Drive(s) Configured
RAID
Size
#Stripes
Easy Configuration - ARRAY SELECTION MENU
10
308988MB
PORT #
0
DNLIN A00-00
1
DNLIN A00-01
Logical Drive 0
ONLIN A00-03
RAID = 1
Size = 154494MB
DWC = Off
RA
= On
Accept
SPAN = NO
Disk Write Cache Setting Of VD
StripSz
Status
4
64 KB
ONLINE
RAID Level
StripSz
Status
4
64 KB
ONLINE
Change DWC
Off
On
6-13
Advertisement
Table of Contents
