Usb Connectors (10-1 Pin Usb34, Usb) - Asus Pedestal/5U Rackmount Server TS500-E5 User Manual

8. USB connectors (10-1 pin USB34, USB56)
These connectors is for USB 2.0 ports. Connect the USB module cable to
the connectors, then install the module to a slot opening at the back of the
system chassis. The USB connectors comply with USB 2.0 specification that
supports up to 480 Mbps connection speed.
DSAN-DX/TS500-E5
USB 2.0 connectors
The USB port module is purchased separately.
9. CPU and system fan connectors (4-pin CPU_FAN1/2, REAR_FAN1/2,
FRNT_FAN1/2/3/4)
The fan connectors support cooling fans of 350 mA–740 mA (8.88 W max.)
or a total of 3.15 A–6.66 A (53.28 W max.) at +12V. Connect the fan cables
to the fan connectors on the motherboard, making sure that the black wire of
each cable matches the ground pin of the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors!
DSAN-DX/TS500-E5
FAN connectors
ASUS TS500-E5
USB56
NC
GND GND
USB_P6+ USB_P5+
USB_P6- USB_P5-
USB+5V USB+5V
PIN 1
CPU_FAN1
CPU_FAN1
REAR_FAN2
GND
FAN Power
FAN Speed
CPU_FAN2
PWM Control
FRNT_FAN2
FRNT_FAN3
FRNT_FAN4
FRNT_FAN1
REAR_FAN1
FRNT_FAN1
USB34
NC
GND GND
USB_P4+ USB_P3+
USB_P4- USB_P3-
USB+5V USB+5V
PIN 1
CPU_FAN2 REAR_FAN1
REAR_FAN2
FRNT_FAN2 FRNT_FAN3 FRNT_FAN4
4-13