Table of Contents
Advertisement
6.2.3
Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using the
View/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
From the Management Menu, highlight Configure, then press <Enter>.
1.
Use the arrow keys to select View/Add Configuration, then press <Enter>.
2.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
The ARRAY SELECTION MENU displays the available drives connected to
3.
the SATA ports. Select the drive(s) you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from READY
to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 0 DISK
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Logical Drives,F4-HSP
The information of the selected hard disk drive displays at the bottom of the
screen.
ASUS TS500-E5
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
View/Add to The Existing Configuration
Easy Configuration - ARRAY SELECTION MENU
PORT #
0
READY
1
READY
77247MB
HDS728080PLA380
PF20A60A
6-15
Advertisement
Table of Contents
