G.26
REVISIONE MOTORE
ENGINE OVERHAULING
Rimuovere la leva superiore.
Remove the upper lever.
fig. 1
Rimuovere la valvola gas (taratura standard: 1,0).
Controllare che si muova liberamente nel corpo carburatore: in
caso di bloccaggio, sostituire.
Remove the throttle valve (standard adjustment: 1,0).
Check for the free movement into the carburettor body: in case of
stick, replace the throttle valve.
fig. 2
Rimuovere il gruppo comando starter.
Togliere la molla e controllare che la valvola non sia danneggiata:
se così fosse, sostituire il gruppo starter completo.
Remove the choke control cable.
Remove the spring and check the valve: if the valve is damaged,
replace the starter assembly.
Rimontare il carburatore operando inversamente rispetto allo
smontaggio.
Reassemble the carburettor in the reverse order that was shown for
fig. 3
disassembling.
fig. 4