SilverCrest SWED 500 A1
Stopwatch
The stopwatch function can be used as follows:
When the device is switched off, press the 'MODE' button (10) three times.
The screen will display 0:00 (minutes:seconds) and the bottom right
hand of the screen will also show the hundredths of a second.
Briefly press the 'TIME/MEM' button (8) to start the stopwatch.
Briefly press the 'TIME/MEM' button (8) again to stop the stopwatch.
To re-set the timer to 0:00, press the 'TIME/MEM' button (8) for about one
second.
While the stopwatch is running, the stopwatch time will be
displayed on the screen (5). When the stopwatch is stopped, the
screen display switches back to the normal time. The time measured
by the stopwatch can be recalled by clicking three times on the
'MODE' button (10).
Set the AM reception range
Due to the various radio transmission systems in different countries, it is best to
adapt the channel spacing and/or the reception area:
Region
Europe
America
This can be done as follows:
When the device is switched off, press the 'MODE' button (10) four times.
On the screen, either EU or US will be displayed as the currently selected
region.
You can use the 'UP' (13) and 'DOWN' (15) buttons to change the region.
26 - English
Frequency band range
522 kHz – 1620 kHz
520 kHz – 1710 kHz
Channel spacing
9 kHz
10 kHz