Replacing The Communication Card; Ups Power Management Suite - Lenovo 5594-6KX Installation And User Manual

Note: Always test the RPO function before applying your critical load to avoid
accidental load loss.

Replacing the communication card

About this task
Follow these steps to replace the UPS Network Management Card.
Procedure
1. Turn off the UPS.
2. Disconnect the network cable.
3. Remove the connector panel blank (
4. Insert the UPS Network Management Card into the slot.
5. Secure the panel by tightening the two screws.

UPS Power Management suite

The UPS ships with the UPS Power Management suite. It operates on a computer
running Windows or Linux, plugged into the UPS output.
To begin installing, see the UPS Power Management suite CD.
The UPS Power Management suite provides real-time graphics of UPS power data.
It also gives you a complete record of critical power events, and it notifies you of
important UPS or power information.
If there is a utility power outage and the UPS battery power becomes low, the UPS
Power Management suite can attempt to shut down your computer before the UPS
shutdown occurs.
36
Installation and User's Guide
), which is secured by two screws.