Panasonic KX-TD500 System Reference Manual page 821

A. The Structure of the
Manual Vol. 2
Introduction
This system reference manual provides general
technical information on Panasonic KX-TD500
system.
This includes a description of the system, its
hardware and software, features and service,
environmental requirements.
This manual is intended to serve as an overall
technical reference for the system.
Organization
The manual vol. 2 is comprised of the following 13
sections.
Section 8 Preparation for Programming and
Operation (VT220 and Compatibles)
This section describes the basic usage and
available functions of VT220 and Compatibles.
Section 9 Preparation for Programming and
Operation (Dumb)
This section describes the basic usage and
command reference of Dumb terminal.
Section 10 System Programming (VT220 and
Compatibles)
This section provides information for the
programming of the system database using VT220
and Compatibles.
Section 11 System Programming (Dumb)
This section provides information for the
programming of the system database using Dumb
terminal.
Section 12 System Programming (PITS)
This section provides information for a certain
programming of the system database using PITS
telephone.
Section 13 Station Programming (PITS)
This section provides information for the
programming of various features specific to each
PITS telephone and DSS console using PITS
telephone.
Section 14 Station Programming (ATT)
This section provides information for the diagnosis
of the attendant console.
Section 15 Maintenance (VT220 and
Compatibles)
This section describes the information necessary
for monitoring, testing, and maintaining the system
using VT220 and Compatibles.
Section 16 Maintenance (Dumb)
This section describes the information necessary
for monitoring, testing, and maintaining the system
using Dumb terminal.
Section 17 Backup Utility-On-Site
This section provides the information for saving
and loading of the system programming data
(including attendant console database) at on-site.
Section 18 Backup Utility-Remote Location
This section provides the information for saving
and loading the system programming data
(including attendant console database) from a
remote location.
Section 19 Abbreviations
This section provides a list of abbreviations used
in this manual.
7-A-1