Panasonic KX-TD500 System Reference Manual page 624

1.05 Unscreened Call Transfer
— to a UCD Group (with OGM)
Description
Allows any extension user to transfer an outside
call to a UCD Group from 01 to 04 (with OGM
type).
Programming
System Programming
"Special Attended–UCD (1/2)"
"World Select 3(WS3)",
SLT Transfer Operation
Conditions
If all group members are not available to answer
the call, it will be redirected to the Overflow
destination. In this case, the call will be
disconnected if not answered by the Overflow
destination within 60 seconds.
See page 3-D-13 for further information.
Operation -1 (Mode 1 or 3)
While having a conversation;
1. Press the switchhook for
approximately one half second
and release it.
• The other party is put on
Consultation Hold.
• You hear confirmation tone 2
and then dial tone 1, 3, or 4.
2. Dial the FDN for UCD group (01
to 04).
• You hear confirmation tone 3
and then dial tone 1, 3, or 4.
3. Replace the handset.
Reference
VT Dumb
10-I-3.01 11-C-37.00
11-C-45.00
5-D-6
Operation -2 (Mode 2)
While having a conversation;
1. Press the switchhook for
approximately one half second
and release it.
• The other party is put on
Consultation Hold.
• You hear confirmation tone 2
and then dial tone 1, 3, or 4.
2. Dial the feature number for
"Transfer" (Default : 691).
• You hear confirmation tone 3
and then dial tone 1, 3, or 4.
3. Dial the FDN for UCD group (01
to 04).
• You hear confirmation tone 3
and then dial tone 1, 3, or 4.
4. Replace the handset.
Feature References
Uniform Call Distribution (UCD)–with/without
OGM (Section 3-D-2.06).