9.00 Electronic Station Lockout
Description
Electronic Station Lockout allows an extension
user to prohibit other extension users from making
outgoing CO calls from his or her extension.
Any three-digit number (000 to 999) can be used
as a lock code.
To execute this function, assign "System-Class of
Service", Station Lock to "Yes".
Programming
System Programming
"System-Class of Service (1/3)",
Station Lock
"System-Numbering Plan (7/11)",
Station Lock Set
Station Lock Cancel
Conditions
Both Operator 1 and 2 (extension user or
Attendant Console) can also set and cancel this
function.
Once the operator locks an extension, the
extension user cannot unlock it.
See Section 4-I-11.00 "Remote Station Feature
Control" for the details.
Set and cancel Electronic Station Lockout on the
PDN button.
Reference
VT
Dumb
10-D-4.01
11-C-7.00
10-D-6.07
11-C-11.00
4-I-18
Operation
Setting Electronic Station Lockout
1. Lift the handset or press the SP-
PHONE button.
2. Dial the feature number for
"Station Lock Set" (Default : *80).
3. Dial the lock code: 000 to 999.
4. Dial the same lock code again.
• You hear confirmation tone 2.
• If your PITS has a display, it
shows:
Locked No. : xxx
5. Replace the handset.
Canceling Electronic Station Lockout
1. Lift the handset or press the SP-
PHONE button.
2. Dial the feature number for
"Station Lock Cancel" (Default :
#80).
3. Dial the lock code.
• You hear confirmation tone 2.
• If your PITS has a display, it
shows:
Unlocked
4. Replace the handset.
lock code