Panasonic KX-TD500 System Reference Manual page 352

Programming
Conditions
• E-1 General
System Programming
"Configuration - Slot Assignment"
"Configuration - Channel Assignment"
E-1 card
"System Clock Mode (CLK)"
"Master Clock Priority (CLP)"
• DR2
System Programming
"Group - Trunk Group (1/3)"
"Group - Trunk Group (2/3)"
"Group - Trunk Group (3/3)"
"Trunk - CO Line"
"Special Attended - DID"
"World Select 3 (WS3)",
Tone Except Idle Status
"MFC Sequence Parameter"
"Answer Signal Wait Time (AWT)"
"MFC-R2 Option (MRO)"
• Charge Management
System Programming
"E-1 Signaling Option (ESO)"
Refer to Section 3-F-17.00 "Charge Management" for other
programming items required.
• E-1 TIE Line
System Programming
"Pulsed E&M (PEM)"
Refer to Section 3-F-14.00 "TIE Lines" for further information.
1. Up to six E1 DIGITAL TRUNK Cards (120 ports) can be installed to the
system.
Refer to Section 3-F-15.00 "T-1 Carrier" for further conditions.
10-C-2.00
10-C-4.02
10-E-1.01
10-E-1.02
10-E-1.03
10-F-1.00
10-I-2.00
3-F-92
Reference
VT Dumb
11-C-2.00
11-C-56.01
— 11-C-56.02
— 11-C-56.03
Reference
VT Dumb
11-C-15.00
11-C-16.00
11-C-17.00
11-C-20.00
11-C-36.00
— 11-C-45.00
— 11-C-60.00
— 11-C-64.00
— 11-C-56.07
Reference
VT Dumb
— 11-C-56.08
Reference
VT Dumb
— 11-C-56.09