Panasonic KX-TD500 System Reference Manual page 448

Hide thumbs Also See for KX-TD500:
Table of Contents

Advertisement

4.04 Automatic Redial
Description
Automatic Redialing is activated by pressing the
SP-PHONE button and REDIAL (LNR) button
successively (On-hook dialing).
By default, redialing will be repeated 10 times
automatically at 60-second intervals until the
called party answers.
When no idle line is
available
Busy tone sounds
for five seconds
Programming
System Programming
"World Select 1(WS1)",
Automatic Redial Retry Count
Automatic Redial Retry
Interval
Conditions
Besides the number, this function memorizes the
button (DN or CO) used for the last call and
executes automatic redial on that button.
Pressing the REDIAL (LNR) button while the last
used button is in use causes the system to wait
until the button becomes idle. As soon as the
button becomes idle, this function is executed.
If the last used button was the PDN and multiple
PDNs are available, the system selects any idle
PDN.
Automatic Redialing is terminated, if any key
Press the REDIAL (LNR) button in hands-free status
Redialing automatically
When the opposite
station is busy
Stand by for 60 seconds.
(During this time, the indicator
on the SP-PHONE button
flashes in red slowly. In other
status, indicator lights).
Reference
VT
Dumb
11-C-43.00
4-C-14
No answer after dialing 10 times conclude this
function, turning the SP-PHONE button off.
Automatic Redialing is available with the
following PITS telephones only:
KX-T123230D, KX-T123235, KX-T7130, KX-
T7030, KX-T7050, KX-T7220, KX-T7230,
KX-T7235
When ringback tone sounds
from the other party
The other party answers
Conversation
operation is made during Automatic Redialing.
If a CO line is not seized, busy tone sounds for
five seconds.
Turning the SP-PHONE off while hearing busy
tone activates Automatic Callback-Trunk.
For further information, refer to Section 4-C-6.01
"Automatic Callback-Trunk".
Operation
1. Press the SP-PHONE button.
2. Press the REDIAL (LNR) button.
• The indicator on the SP-
PHONE button flashes in red
slowly for 60 seconds of
standby status.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents