Station Message Detail - Panasonic KX-TD500 System Reference Manual

F. Other Features

1.00 Station Message Detail

Recording (SMDR)
Description
It is possible to print out the following information
to a serial line printer.
• Information about outgoing CO calls
• Information about incoming CO calls
• Error log data
• Programming data
• Traffic data
KX-TD500 has 2 types of SMDR format for CO
Calls.
Format types are :
1. Without charge information format. (Default)
2. With charge information format.
It is able to change the SMDR format by "WS3-
Charge Display" command.
To execute SMDR, connect the output device to
SIO #2 port of RS-232C on the basic shelf and
set "System-Operation", SMDR to "Yes".
To print out the information about outgoing CO
calls, set "System-Operation", Outgoing Duration
Log to "All Call".
To print out the information about incoming CO
calls, set "System-Operation", Incoming Duration
Log to "Yes".
To print out error log data, set "System-
Operation", Error Log to "Yes".
To print out programming data, set "System-
Operation", Programming to "Yes".
To print out traffic data, set "System-Operation",
Traffic to "Yes".
Programming
System Programming
"System-Operation (2/3)",
SMDR
Page Length (4~99)
Skip Perf (0~95)
Outgoing Duration Log
Incoming Duration Log
Attendant Duration
Special Carrier Name
Print Secret Dial
Error Log/Programming/Traffic
"System-Communication Interface"
"World Select 3 (WS3)",
Charge Display
Reference
VT Dumb
10-D-1.02 11-C-4.00
10-D-7.00 11-C-11.00
11-C-45.00
3-F-1
1.01 SMDR Parameters
Page Length
The page length may be selected to position a
title and data on each page.
A page length code indicates the number of
lines per page.
A title will be printed on the first three lines of
each page.
4 4 lines per page
• •
• •
• •
• •
99 99 lines per page
Standard Continuous Paper (11 inches)
page
66 lines
length
(Default)
machine
perforation
To print data, page length must be longer than
skip perforation by four or more lines.
Skip Perforation
The skip perforation code indicates the number
of lines to be skipped. When the print head
reaches the line designated, the print head
moves to the top position of the next page.
0 Print head does not skip. (Default)
1 Print head skips the last line.
2 Print head skips the last two lines.
•
•
•
•
95 Print head skips the last 95 lines.
skip
perforation
•
•
•
•