Panasonic Eco Solutions Nordic AB
MEW01603 Rev: -
5.5
Escape
menu
Routing equipment (B5)
Outputs for routing equipment (fire alarm and fault condition
respectively) can be disabled via menu B5.
Cont. from
, page 7.
B1 Zone or Zone / Address
Press ( ) four times.
B5 Routing equipment
Press ( ).
Disable routing equipment
NOTE! To Re-enable, see ➓ below.
Fire
By default is
After "Fire" or "Fault" is selected, press ( ).
A successful disablement is indicated by a beep and a
shown in the Disabled routing equipment list.
A not successful disablement is indicated by another beep and a
Re-enable
➓ Press the Soft key
Disable routing equipment
Disabled routing equipment list
⓫ Highlight the output. Press ( ) if required.
Press ( ). A successful Re-enablement is indicated by a beep
and it will also disappear from the Disabled routing equipment list
⓬ To leave a menu press ESC.
To leave the menu system press the Soft key "Escape menu".
EBL512 G3 version 2.0.x, Daily user's manual
selected. Press ( ) to highlight
⇥
to toggle between:
"
"
12
Fault
.
It will also be
"√".
"X".
.