Log On To The Control Unit (C.i.e.) - Panasonic EBL512 G3 User Manual

Panasonic Eco Solutions Nordic AB
MEW01603 Rev: -
3
Menu

Log on to the Control Unit (c.i.e.)

User name
Up to ten (10) User names (0, 1, 2 - - 9) might be programmed.
Default are normally three User names available (0, 1 and 2) but they
might have been changed and/or User names 3 – 9 might have been
added during the commissioning of the system. User name examples:
0 Information only
1 Building officer
2 Service personnel
3 Mr. Xxxxxxxxx
4 Miss Yyyyyyyyy
etc.
Password
Each User name has a Password for an access level / type, i.e.
"Information only", "Building officer" or "Service personnel".
Access levels (access types):
Information only will give access to the menus H4, H6, H9 and H10.
Building officer will give access to the menus H1, H2, H3, H4, H6,
H7, H9 and H10. (Described in this document.)
Service personnel will give access to the menus H1, H2, H3, H4, H5,
H6, H7, H8, H9 and H10.
How to log on

Press the Soft key "Menu".

With the keypad select 0, 1, 2 - - 8 or 9 for a User name.

Type the Password for that user name. (Six digits. * * * * * *)
After typing a correct Password a main menu list with the available
menus will be displayed. (For "0", i.e. Information only, is by default
no Password required.)
Information only
H4 Present system status
H6 Display FAULTS (No possibility to Acknowledge the faults.)
H9 Interlocking outputs and inputs
H10 Change password (Password for the User name that was used for
log on to the control unit.)
EBL512 G3 version 2.0.x, Daily user's manual
4