Panasonic EBL512 G3 User Manual page 7

Panasonic Eco Solutions Nordic AB
MEW01603 Rev: -
Building officer (Described in this document.)
H1 Perform monthly test
H2 Disable or re-enable
H3 Set calendar and clock
H4 Present system status
H6 FAULT Acknowledge
H7 Perform ZONE TEST
H9 Interlocking outputs and inputs
H10 Change password (Password for the User name that was used for
log on to the control unit.)
Service personnel
H1 Perform monthly test
H2 Disable or re-enable
H3 Set calendar and clock
H4 Present system status
H5 Service
H6 FAULT Acknowledge
H7 Perform ZONE TEST
H8 Maintenance
H9 Interlocking outputs and inputs
H10 Change password (Password for the User name that was used for
log on to the control unit.)
Keypad

Use the arrow keys (  ,  ,  ,  ) to step in the
menu lists and in the selected menu respectively.
Press Return / Enter ( ) to accept / select.
A quick jump to a menu can be done by pressing the
corresponding digit key, e.g. "6" for menu H6.

Press ESC to stop the enting of data and to jump one
step upwards in the menu system, e.g. from a sub menu
to a main menu.
EBL512 G3 version 2.0.x, Daily user's manual
5