Panasonic Eco Solutions Nordic AB
MEW01603 Rev: -
11
Menu
Escape
menu
Change password (H10)
You can change the Password for the User name that was used for log on to
the control unit. An incorrect password will result in no change.
Press the Soft key "Menu".
With the keypad select 0, 1, 2 - - 8 or 9 for a User name.
Type the Password for that user name. (Six digits. * * * * * *)
H1 Perform monthly test
Press ( ) nine times to highlight menu 10
H10 Change password
Press ( ). The User name
shown.
➏ Use the keypad to type the Password that shall be changed.
Type the new Password. (Six digits. * * * * * *)
The new Password has to be verified.
To leave a menu press ESC
To leave the menu system press the Soft key "Escape menu".
EBL512 G3 version 2.0.x, Daily user's manual
that was used for log on to the control unit is
26