Disable / Re-Enable Interlocking Output (C3) - Panasonic EBL512 G3 User Manual

Panasonic Eco Solutions Nordic AB
MEW01603 Rev: -
Escape
menu
10.3
Escape
menu
⓭ Press ( ). A successful deactivation is indicated by a beep and the
output will also disappear from the Deactivate list
⓮ To leave a menu press ESC
To leave the menu system press the Soft key "Escape menu".

Disable / re-enable interlocking output (C3)

Up to 100 interlocking outputs in the whole system can be
individually disabled / re-enabled via menu C3. The LED "General
disablements" is also indicating disabled interlocking outputs.
Cont. from ➏, page 23.
C1 Activated interlocking outputs / inputs

Press (  ) two times.
C3 Disable / re-enable interlocking output
➑ Press ( ).
Disable
By default is Interlocking output area: 000 point: 00 shown.
➒ Use the keypad to type an area and point number.
❿ Press ( ).
A successful disablementis indicated by a beep and a
be shown in the Re-enable list
A not successful activation is indicated by another beep and a
Re-enable list
⓫ Press the Soft key
Disable
Re-enable list
⓬ Scroll in the list with (  ) or (  ) and select.
⓭ Press ( ). A successful re-enablement is indicated by a beep and the
output will also disappear from the Re-enable list
⓮ To leave a menu press ESC
To leave the menu system press the Soft key "Escape menu".
EBL512 G3 version 2.0.x, Daily user's manual
.
⇥
to toggle between:
" "
25
.
It will also
"√".
"X".
.