Reset Interlocking Output (H9/C3); Disable Interlocking Output (H9/C4); Re-Enable Interlocking Output (H9/C5); Interlocking Control Expressions - Panasonic EBL128 Planning Instructions

Panasonic Eco Solutions Nordic AB
MEW01622 Rev: -
11.3.3
11.3.4
11.3.5
11.4
control expression.
Reset has to be performed via menu H9/C3.

Reset interlocking output (H9/C3)

Activated interlocking outputs are listed here. Use "↑" "↓" to scroll
between the "Interlocking Combinations" (Area / Point).
Interlocking output activated via its control expression and latching
output selected: The output has to be reset via this menu.
Interlocking output activated via its control expression and latching
output not selected: The output can be reset via this menu.
Interlocking output activated via menu H9/C2: The output has to be
reset via this menu.

Disable interlocking output (H9/C4)

Interlocking outputs (i.e. Output Type = Interlocking) can be disabled
via menu H9/C4. A disabled output will stay in (or return to) the
normal condition for the output respectively.
Combination" (i.e. Area / Point) is to be entered to disable the output.
All interlocking outputs can be disabled collectively via menu H2/B4.

Re-enable interlocking output (H9/C5)

Interlocking outputs (i.e. Output Type = Interlocking) can be re-
enabled via menu H9/C5.
Disabled interlocking outputs are listed in menu H9/C5. Use "↑" "↓"
to scroll between the "Interlocking Combinations" (i.e. Area / Point)
or type it via the key-pad.
All interlocking outputs, disabled via menu H2/B4, can be re-enabled
via menu H2/B8.

Interlocking control expressions

A programmable output control expression can contain "interlocking"
trigger conditions ("Functions") numbers 14-17 (see chapter "Control
expression", page 78), i.e. one or more outputs can be activated when
one or more interlocking inputs are activated.
EBL128 Planning Instructions V2.0.x
89
The "Interlocking