NEC DS1000 Quick Setup Manual page 49

The following chart lists the available Programmable Function Key assignments. For more on features asso-
ciated with these keys, refer to the Software Manual on your System Document CD.
• Account Code
• Call Coverage
• Call Forwarding
• Call Timer
• Group Pickup
• Headset Key
• Hotline
Programming
To assign an extension's Programmable Function Keys:
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter
1701:KEY PROGRAMMING
EXTENSION #?nnn
3. Enter the number of the keyset extension you want to program (e.g., 300) +
1701:EXT:nnn
KEY NUMBER?n
4. Enter the number of the key you want to program (1-24) + HOLD. You see:
1701:EXT:nnn KEY:n
nnnnnnnnn
5. For the key selected, enter the code for the feature you want to assign plus any additional data (see the
chart below) +
DS1000/2000 Quick Setup Guide
• Intercom Directory
Dialing
• Line Key
• Loop Key, Fixed
• Loop Key, Switched
• Message Center
• Night Key
• Page Zones
1701 + HOLD . You see:
The previously programmed assignment displays.
.
VOL Up
You can optionally press ICM + VOL Up to scroll through the available key options.
1
Feature
Undefined (blank) Key
Switched Loop Key
Fixed Loop Key
Line Key
Park Orbit Key
Hotline Key
Call Coverage Immediate Ring
Call Coverage No Ring (lamp only)
Call Coverage Delay Ring
Group Pickup Immediate Ring
Section 2: Customizing Features
• Park Orbit
• Reverse Voice Over
• Save
• Speed Dial, Personal
• Speed Dial, System
• Split Key
• Voice Mail Record Key
02
03
05 + Hotline Partner's Extension (e.g., 304)
+ Covered Extension (e.g., 304)
06
07 + Covered Extension (e.g., 304)
08 + Covered Extension (e.g., 304)
09
Section 2: Customizing Features ◆ 2-25
HOLD . You see:
Key Code
00
01
+ Trunk group (90-98)
+ Line number (e.g., 1)
04 + Park Orbit (60-69)
+ Pickup Group (1-16)
2