NEC DS1000 Quick Setup Manual page 53

2. Enter
1101:SYSTEM SPD DIAL
BIN?nnn
3. Enter the number of the system bin you want to program (200-299) +
1101:SPDL BIN:nnn
LINE/GRP/ICM:n
4. Enter the trunk number (e.g., 1) you want the system to use when dialing the stored number +
Enter the Trunk Group number (90-98) you want the system to use when dialing the stored number +
HOLD
Press
1101:SPDL BIN:nnn
NUM?nnnnnnn
5. Enter the System Speed Dial number for the selected bin +
1101:SPDL BIN:nnn
NA?nnnnnnn
automatically uses the next adjacent bin in addition to the bin you are programming.
6. Enter the name for the selected bin +
7. Go back to step 3 and select another bin to program.
Press
DS1000/2000 Quick Setup Guide
1101 + HOLD . You see:
OR
.
OR
ICM + HOLD if you want to enter Intercom codes. You see:
The Speed Dial number can be up to 32 digits long. If the number is longer than 16 digits, it
See Keys for Entering Names below for more.
OR
CONF to exit program 1101.
Section 2: Customizing Features
HOLD
HOLD .
Section 2: Customizing Features ◆ 2-29
HOLD . You see:
. You see:
HOLD .
2