Storage - Silvercrest SNHT 1.5 B2 Operating Instructions Manual

NOTICE
► At regular intervals place a few drops of blade oil suitable
for razor appliances in the cutting head holder 2, at the
latest when the blades no longer run smoothly.
► For this you need to remove the cutter head holder
1) Turn the cutter head holder
approx. 45° to release and remove it.
2) To reattach it, place the cutter head holder
45° to the right onto the hand element 4 and so that it
grips into the rail on the hand element 4.
3) Turn the cutter head holder
to secure it.

Storage

■ Store the appliance at a clean and dust-free location.
■ Always place the protective cover
protect it.
■ If the appliance is not to be used for an extended period, remove
the battery so as to avoid battery leakage.
SNHT 1.5 B2
2 anti-clockwise through
2 at about
2 in a clockwise direction
0 on the cutter head 1 to
2:
9
GB
IE