Decode Upc/Ean/Jan Supplementals - Motorola PL3307 Integration Manual

Decode UPC/EAN/JAN Supplementals

Parameter # 10h
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2,
EAN 13+2). The following options are available:
•
If you select Ignore UPC/EAN with Supplementals , and the decoder is presented with a UPC/EAN
plus supplemental symbol, the decoder decodes UPC/EAN and ignores the supplemental characters.
•
If you select Decode UPC/EAN with Supplementals , the decoder only decodes UPC/EAN symbols with
supplemental characters, and ignores symbols without supplementals.
•
If you select Autodiscriminate UPC/EAN Supplementals , the decoder decodes UPC/EAN symbols
with supplemental characters immediately. If the symbol does not have a supplemental, the decoder
must decode the bar code the number of times set via
page 9-16 before transmitting its data to confirm that there is no supplemental.
•
If you select one of the following Supplemental Mode options, the decoder immediately transmits
EAN-13 bar codes starting with that prefix that have supplemental characters. If the symbol does not
have a supplemental, the decoder must decode the bar code the number of times set via
Supplemental Redundancy on page 9-16
supplemental. The decoder transmits UPC/EAN bar codes that do not have that prefix immediately.
• Enable 378/379 Supplemental Mode
• Enable 978/979 Supplemental Mode
NOTE If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
Enable/Disable Bookland EAN on page 9-11
ISBN Format on page
• Enable 977 Supplemental Mode
• Enable 414/419/434/439 Supplemental Mode
• Enable 491 Supplemental Mode
• Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed
previously.
• Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit
user-defined prefix. Set this 3-digit prefix using
• Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either
of two 3-digit user-defined prefixes. Set the 3-digit prefixes using
on page 9-16
• Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any
prefix listed previously or the user-defined prefix set using
page 9-16.
• Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with
any prefix listed previously or one of the two user-defined prefixes set using
Supplementals on page
NOTE To minimize the risk of invalid data transmission, select either to decode or ignore supplemental
characters.
9-12.
.
9-16.
UPC/EAN/JAN Supplemental Redundancy on
before transmitting its data to confirm that there is no
to enable Bookland EAN, and select a format using
User-Programmable Supplementals on page
User-Programmable Supplementals on
Symbologies 9 - 13
UPC/EAN/JAN
User-Programmable Supplementals
User-Programmable
Bookland
9-16.