Table of Contents
Advertisement
U
NPACKING
Follow these steps to safely unpack the printer:
1.
Open the top cover of the shipping box.
2.
Remove the optional 2nd Tray box (if you have the
4650NX model) and remove the QuickStart poster.
3.
Open the inner printer box and remove the Accessory kit
and Starter kit.
4.
Turn the large plastic box screws at the bottom of the box
to the left (A) and pull them out (B).
5.
Using your thumb and finger, remove the plastic screw
sleeves from the box (C).
6.
Lift off the outer box (D).
Unpacking the Inner Printer Box
A
note:
Save the box, box screws,
and packing material. If you ship
the printer in the future, be sure to
follow the special packing
instructions in Appendix D to
safeguard internal components.
12
SuperScript 4650 Series — User's Guide
7. Open the plastic bag that contains the printer and slide it
8. With one person on each side of the printer, grasp the
9. Lift the printer and place it on a sturdy, level surface.
B
D
down.
printer at the hand grips where they are exposed by
notches in the foam padding (E).
If you are setting up a 4650NX printer unpack the
optional 250-sheet Tray and attach it first before
installing anything inside the printer!
See Page 28 in Chapter 3 or the 4650 Series QuickStart.
C
E
Caution!
The printer and packaging
weigh approximately 100lbs. To set up the
printer and move it requires two adults.
Advertisement
Table of Contents
Troubleshooting
