Replacing The Belt Cartridge - NEC Superscript 4650 User Manual

R
EPLACING THE
Order Number 20-205
1. Turn off the printer (A).
2. Open the Front and Top Covers (B).
3. Flip up the Lock Levers to release the Belt Cartridge (C).
4. Pull the old Belt Cartridge straight up and discard it (D).
5. Remove the black wrapper from the new Belt Cartridge
and pull out the two tension release pins as shown (E).
WARNING! Do not touch the green material on the Belt
Cartridge. It is easily scratched.
6. With the flat side of the Belt Cartridge facing the front,
insert it straight into the guide slots in the lock levers.
The white gear on the cartridge goes to the right.
A
E
B C
ELT ARTRIDGE
B
F
Do not use force (F).
7. Flip down the Lock Levers (G).
8. Close the Front and Top Covers.
9. Reset the Operator Panel to make sure the consumables
usage information is current (H). Follow these steps:
a. Press Online.
b. Press Menu.
c. Press Next until
display, and then press Select.
d. Press Next until
display, and then press Select.
e. When the panel displays
f. Press Menu. Press Online.
C
G
appears on the display.
OFFLINE
appears on the display.
PRINT FORM
appears on the
USAGE STATUS
appears on the
BELT REPLACE?
, press Select.
CONFIRM
D
H
Power
Data
Feed
Previous

Replacing the Belt Cartridge

Warning Online
Menu OnLine
OHT Label
Item Media
Select
Next
91