Table of Contents
Advertisement
8.
Facing the back of the printer, locate the Connector Cable
at the rear of the Paper Tray 2 unit (D).
9.
Remove the Cable Connector Doors at the rear of the
printer and the 2nd tray (E).
10. Plug the cable in to the printer socket (F).
11. Place the Cable Connector Door that you removed from
the printer over the opening on the Paper Tray 2 unit.
Place the Cable Connector Door that you removed from
Paper Tray 2 over the cable plug opening on the back of
Adding Paper Tray 2 Unit
D
H
12. Snap on the left and right Paper Tray 2 unit covers (H).
13. Reconnect the power and interface cables to your
14. Load paper into your new Paper Tray 2 (J). To check
15. Update your printer driver. See Chapter 4 about
E
F
I
the printer (G).
printer (I).
operations, turn your printer on and send a print job to
the printer using paper from both trays.
changing device settings in your driver.
G
Switch Cable Connector Doors
after connecting cable!
J
Adding the Paper Tray 2 Unit
29
Advertisement
Table of Contents
Troubleshooting
