Time Settings - Hitachi Compute Blade 500 Series User Manual

HCSM
Tip: The only service settings that can be configured from the LCD touch
console are those for services that connect via IPv4 addresses in the
management network of the management modules. To configure the service
settings for services that connect via IPv6 addresses, use the Web console or
the CLI console.

Time settings

Operation: Home > System settings > Time settings
In the Time settings window, you can set up the local time settings, the
time zone settings, and the daylight saving time (DST) settings. The BMC
time settings and management module time settings correspond by NTP in
the default settings. This setup can be configured the time settings of BMC
and management module when introducing a system.
1 Touch Home > System settings > Time settings and then the Time
.
settings window is displayed.
Items
Current time
Time zone
DST settings
Start
time
of DST
End
time
of DST
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Items
Port number
Access control
Connectable
network address
Net mask
HCSM
Table 2-5 Time settings
Displays current local time, which is set up the time zone. Also displays
that the DST or the standard time.
Displays the time zone settings.
Displays that the DST settings is enabled/disabled.
Month Daylight saving time start/end
The following descriptions show about the start/end time of DST.
Rule
For the "Month" and "Time", the specified "Month" and "Time" are the
Date
date of start/end time of DST.
Day
• Date specification:
Displays that the specified "Month" and "Date" of start/end time of
Time
DST. In this case, "Day" setting is disabled.
Month
• First day after date:
Rule
Start/end time of DST is the first day after the specified "Date".
Date
Functional detail
Descriptions
To set up the port number of connecting by HTTPS.
To select enable/disable of IP address access control for
connecting by HTTPS.
To set up the connectable network address by HTTPS
when the IP address access control is enabled
To set up the connectable subnet mask by HTTPS when
the IP address access control is enabled.
To select enable/disable for HCSM function.
Descriptions
2-5