Fan Module - Hitachi Compute Blade 500 Series User Manual

Management module firmware update
Operation: Home > Hardware maintenance > Management module >
F/W update
In the F/W update window, you can update the firmware of management
module from a USB flash drive, which is stored the firmware of management
module, the SEL dictionary, and the instrument parameter.
1 Touch Home > Hardware maintenance > Management module >
.
Updating firmware, and then touch Operation. The Updating
firmware window will be displayed.
Tip:
• You can update the firmware of the management module, the SEL
dictionary, and the instrument parameter individually or in bulk.
• When mounting the backup management module, both of management
modules are updated automatically even if only one of these management
modules is updated.

Fan module

Operation: Home > Hardware maintenance > Fan module
You can confirm the operation status of fan module, hardware information,
and sensor information.
In the Fan module window, you can confirm the current status summary of
fan module and the detail information of fan module.
1 Touch Home > Hardware maintenance > Fan module, and then the
.
Fan module window is displayed.
Items
#
Install
Power
Status
2-18
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Table 2-13 Fan module
Displays the module number.
Displays the status of installed module.
Installed : Module installed
Not installed: No module installed
Displays power status of module.
ON: Power-on
OFF: Power-off (including sleep status)
---: No module installed
Displays a status of module operation.
Normal : Normal operation
Warning : Warning status
Fail: Failure status
---: No module installed
Functional detail
Descriptions