In the Switch module window, you can confirm the current status summary
of switch module and the detail information of each switch module. You can
also move the maintenance mode.
1
Touch Home > Hardware maintenance > Switch module, and then
.
the Switch module window is displayed.
Items
#
Install
Power
Status
LID
Maintenance Value: Maintenance mode is enabled. Value shows the time period, which
Type
Switch module detail information
Operation: Home > Hardware maintenance > Switch module > Detail
information
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Table 2-9 Switch module
Displays the module number.
Displays the status of installed module.
Installed : Module installed
Not installed: No module installed.
Displays power status of module.
ON: Power-on
OFF: Power-off (including sleep status)
---: No module installed.
Displays a status of module operation.
Normal: Normal operation
Warning: Warning status
Fail: Failure status
---: No module installed.
Displays LID power-on/off status.
ON: Power-on LID
OFF: Power-off LID
---: No module installed.
is in minutes, until automatic cancellation.
OFF: Maintenance mode is disabled.
Displays the following various switches.
1G LANSW: Hitachi 1 Gb/sec LAN switch module (20 ports)
1G 40LAN-SW: Hitachi 1 Gb/sec LAN switch module (40 ports)
1/10G LAN-SW: Hitachi 1/10 Gb/sec LAN switch module
8G FC-SW: Brocade 8 Gb/sec Fibre Channel Switch Module
16G FC-SW: Brocade 16 Gb/sec Fibre Channel Switch Module
10G DCB-SW: Brocade 10 Gb/sec DCB Switch Module
1G LAN-PT: 1 Gb/sec LAN Pass-through Module
10G LAN-PT: 10 Gb/sec LAN Pass-through Module
---: No module installed.
Functional detail
Descriptions
2-13