Hitachi Compute Blade 500 Series User Manual page 30

Items
LID
Maintenance
Hot standby
status
Management module detail information
Operation: Home > Hardware maintenance > Management module >
Detail information
In the Detail information window, you can confirm the detail information of
management module.
1 Touch Home > Hardware maintenance > Management module >
.
target management module > Detail information, and then the Detail
information window will be displayed.
Items
Install
Power
Status
LID
2-16
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Displays LID power-on/off status.
ON: Power-on LID
OFF: Power-off LID
---: No module installed
Numeric value: Maintenance mode is enabled. Numeric value shows
the time period, which is in minutes, until automatic cancellation.
OFF: Maintenance mode disabled.
Displays that the module is main/standby.
Active : Active module
Standby: Standby module
---: No module installed
Table 2-12 Management module detail information
Displays the status of installed module.
Installed : Module installed
Not installed: No module installed
Displays power status of module.
ON: Power-on
OFF: Power-off (including sleep status)
---: No module installed
Displays a status of module operation.
Normal : Normal operation
Warning : Warning status
Fail: Failure status
Booting: Booting status
Shutting down: Shutting down status
Boot disable: Booting is disabled due to
---: No module installed
Displays LID power-on/off status.
Functional detail
Descriptions
Descriptions