Output Dump Log - Hitachi Compute Blade 500 Series User Manual

Server chassis shutdown
Operation: Home > Hardware maintenance > Server chassis >
Chassis shutdown
1 Touch Home > Hardware maintenance > Server chassis > Chassis
.
shutdown, the Server chassis shutdown window will be displayed.
Server chassis maintenance mode settings
Operation: Home > Hardware maintenance > Server chassis >
Maintenance mode settings
You can confirm the maintenance mode status, and you can select enable/
disable.
In the Maintenance mode settings window, you can confirm the
maintenance mode status and the remaining time of maintenance mode. You
can also set up the maintenance mode.
1 Touch Home > Hardware maintenance > Server chassis >
.
Maintenance mode settings, and then the Maintenance mode
settings window will be displayed.
Front panel maintenance mode settings
Operation: Home > Hardware maintenance > Server chassis > Front
panel maintenance mode settings
You can confirm the maintenance mode status of server chassis front panel,
and you can select enable/disable in this window.
In the Front panel maintenance mode settings window, you can confirm
the maintenance mode status of the front panel and the remaining time of
maintenance mode of the front panel. You can also set up the maintenance
mode of the front panel.
1 Touch Home > Hardware maintenance > Server chassis > Front
.
panel maintenance mode settings, and then the Front panel
maintenance mode settings window will be displayed.

Output dump log

Operation: Home > Output dump log
The information required for failure investigation (operation status of the
system unit, hardware information, hardware configuration, SEL, and MAR
log) can be gathered and compressed one file for in a lump in this window.
Maximum capacity: 30 MB.
In the Output dump log window, you can save the dump log in the USB
flash drive, which connect to the USB port of the front panel in server
chassis.
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Functional detail
2-23