Management Module - Hitachi Compute Blade 500 Series User Manual

Items
Switch module LID
Operation: Home > Hardware maintenance > Switch module > LID
In the LID window, you can confirm the LID status of switch module. You can
also set up LID light on/off.
1 Touch Home > Hardware maintenance > Switch module> target
.
switch module > LID, and then the LID window will be displayed.

Management module

Operation: Home > Hardware maintenance > Management module
You can confirm the operation status of management module, hardware
information, and sensor information.
In the Management module window, you can confirm the current status
summary of management module and the detail information of management
module. You can also move to each setup windows, such as LID operation
and firmware update.
1 Touch Home > Hardware maintenance > Management module, and
.
then the Management module window is displayed.
Items
#
Install
Power
Status
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Current
Table 2-11 Management module
Displays the module number.
Displays the status of installed module.
Installed : Module installed
Not installed: No module installed
Displays power status of module.
ON: Power-on
OFF: Power-off (including sleep status)
---: No module installed
Displays a status of module operation.
Normal : Normal operation
Warning : Warning status
Fail: Failure status
Booting: Booting status
Shutting down: Shutting down status
Boot disable: Booting is disabled due to
---: No module installed
Functional detail
Descriptions
Displays the ampere.
Descriptions
2-15