Switch Module - Hitachi Compute Blade 500 Series User Manual

2 Displays primary server blade or non-primary server blade only when a server blade
.
in SMP configuration is selected.
Server blade LID
Operation: Home > Hardware maintenance > Server blade > LID.
In the LID window, you can confirm the LID status of server blade. You can
also set up LID light on/off.
1 Touch Home > Hardware maintenance > Server blade > target
.
server blade > LID, and then the LID window will be displayed.
Server blade firmware update
Operation: Home > Hardware maintenance > Server blade > Updating
firmware
In the Updating firmware window, you can update the firmware of server
blade using the firmware of server blade in the USB device.
1 Touch Home > Hardware maintenance > Server blade > target
.
server blade > Updating firmware, and then the Updating firmware
window will be displayed.
In SMP configuration, select the Primary server blade as a target server
blade.
Tip: The firmware of server blade must be stored in the USB device, which
connect to the USB port of the front panel in server chassis.
In SMP configuration, firmware update is applied to all server blades in the
configuration.
Server blade maintenance mode settings
Operation: Home > Hardware maintenance > Server blade >
Maintenance mode settings
In the Maintenance mode settings window, you can confirm the
maintenance mode status and the remaining time of maintenance mode. You
can also set up the maintenance mode.
1 Home > Hardware maintenance > Server blade > target server
.
blade > Maintenance mode settings, and then the Maintenance
mode settings window will be displayed.

Switch module

Operation: Home > Hardware maintenance > Switch module
You can confirm the operation status of switch module, hardware information,
and sensor information without LAN connection.
2-12
Hitachi Compute Blade 500 Series LCD Touch Console User's Guide
Items
Functional detail
Descriptions