5. OEMSE Commands
5.5. OEMSEEnableiSCSI
Command
OEMSEEnableiSCSI
Description
This command enables iSCSI for the BladeEngine controller instance for the domain.
Specify the instance number of the BladeEngine controller for which iSCSI is to be enabled.
Example: OEMSEEnableiSCSI -OEMSEparams PhyscialHBANumber="2"
Syntax
OEMSEEnableiSCSI [common_options] -OEMSEparams PhysicalHBANumber="< value >"
[SM-CLP-target]
Options
[common_options]
Parameter
Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
-
takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams
of this section. The parameters has to be entered in a key=value format.
Required Parameters
Data
Parameter Name
Type
PhysicalHBANumber
integer
Optional Parameters
None
Possible Error Messages
Common Error Messages
Memory allocation failed,
Min
Max
Default
Description
The instance number of the BladeEngine
0
7
0
Controller for which iSCSI is to be enabled on
this domain.
5.5. OEMSEEnableiSCSI
35