Oemseaddroutetableentry - Fujitsu PRIMERGY BX600 Reference Manual

10gbe i/o module (pcie)
Hide thumbs Also See for PRIMERGY BX600:
Table of Contents

Advertisement

5. OEMSE Commands

5.8. OEMSEAddRouteTableEntry

Command
OEMSEAddRouteTableEntry
Description
This command adds a user specified entry to the BladeEngine iSCSI initiator route table.
Specify an IPAddress, Subnet mask, and Gateway address as required parameters.
Example: OEMSEAddRouteTableEntry -OEMSEparams
IPAddress="10.12.0.1",SubnetMask="255.255.255.0",Gateway="10.12.2.62"
Syntax
OEMSEAddRouteTableEntry [common_options] -OEMSEparams IPAddress="< value
>",SubnetMask="< value >",Gateway="< value >" [SM-CLP-target]
Options
[common_options]
Parameter
Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
-
takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams
of this section. The parameters has to be entered in a key=value format.
Required Parameters
Parameter
Data Type
Name
IPAddress
ipaddress
SubnetMask
subnetmask
Gateway
ipaddress
Optional Parameters
None
Possible Error Messages
Common Error Messages
Invalid value,
Min
Max
Default
0
16
0.0.0.0
0
255
255.255.255.0
1
64
1
5.8. OEMSEAddRouteTableEntry
Description
The IP address of the entry to be
entered in the route table.
The Subnet mask of the entry to be
entered in the route table.
The Gateway address of the entry to be
entered in the route table.
38

Advertisement

Table of Contents
loading

Table of Contents