Oemseaddtarget - Fujitsu PRIMERGY BX600 Reference Manual

5. OEMSE Commands

5.35. OEMSEAddTarget

Command
OEMSEAddTarget
Description
This command adds a target manually to the list of targets for the initiator. Specify the
iSCSI name, IP Address, and Port number for the target. Example: OEMSEAddTarget -
OEMSEparams TargetName="iqn.2003-
07.com.serverengines:tgt1",IPAddress="17.2.21.15",PortNumber="3205"
Syntax
OEMSEAddTarget [common_options] -OEMSEparams TargetName="< value
>",IPAddress="< value >",PortNumber="< value >" [SM-CLP-target]
Options
[common_options]
Parameter Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
- takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams of this section. The parameters has to be entered in a key=value format.
Required Parameters
Parameter Data
Name Type
TargetName string
IPAddress ipaddress
PortNumber integer
Optional Parameters
None
Possible Error Messages
Common Error Messages
Min Max Default
6 255 6
0 0 0.0.0.0
1024 65535 1024
5.35. OEMSEAddTarget
Description
Fully qualified iSCSI name of the target to be
added. Adding target will not login. An explicit
login has to be done on this target.
The IP address of the target to be added.
The Port number of the target to be added.
65