Oemsesetpersistent - Fujitsu PRIMERGY BX600 Reference Manual

5. OEMSE Commands

5.23. OEMSESetPersistent

Command
OEMSESetPersistent
Description
Execute this command to create a Persistent Login for the target. By setting a login as
persistent, the connection will automatically be restored upon reboot. This action takes the
following parameters: IP Address of the portal, Port number of the portal, Instance number
of the BladeEngine controller (Physical HBA) and finally the instance number of the port
(Logical HBA).
Syntax
OEMSESetPersistent [common_options] [-OEMSEparams] [IPAddress="< value
>"],[PortNumber="< value >"],[PhysicalHBAInstanceNumber="< value
>"],[LogicalHBAInstanceNumber="< value >"] [SM-CLP-target]
Options
[common_options]
Parameter Description
Optional input that indicates the SM-CLP target group for the given command. This
SM-CLP-target
overrides the current group. ".." indcates parent group. "/" indicates root group.
- takes in additional parameters as arguments as listed below in the Parameters table
OEMSEParams of this section. The parameters has to be entered in a key=value format.
Required Parameters
None
Optional Parameters
Parameter Name
IPAddress
PortNumber
PhysicalHBAInstanceNumber
LogicalHBAInstanceNumber
Possible Error Messages
Common Error Messages
Data
Min Max
Type
ipaddress 0 0
integer 1024 65535
integer 0 255
integer 0 1
5.23. OEMSESetPersistent
Default Description
The IP address of the target to
0.0.0.0
be made persistent.
The Port number of the target to
1024
be made persistent.
A string input that gives the
0 BladeEngine controller instance
number.
A string input that gives the
logical HBA instance number.
0 Note that each port of the
controller is mapped to one
logical HBA.
53